BLD5 – Sampling by Gravity Type with Heating/Cooling Jacket Features Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve BF Series 3-way ball valves (rod linkage):PTFE seat and FKM O-ringMax working pressure: 1500 psig @ 70℉ (103 bar @ […]
Features Technical Data Thread Type Reference Specification NPT ASME B1.20.1, SAE AS71051 Unified (SAE) ASME B1.1, SAE J475 Working Pressure Flaring Operation Tube flaring is carried out in two different ways, single wall flare on thick wall tubes and double wall flare on thin wall tubes to reinforce same. Installation Instructions Cautions For any inquires […]
Construction & Performance FITOK 20D Series Tube Fittings are widely used in oil and gas, chemical, power and hydrogen industries for their good performance such as the reliable sealing performance, high working pressure (up to 20,000 psig), high resistance to vibration and corrosion, easy installation and etc. Construction Introduction and Working Principle 20D series tube […]
BLE5 – Overflow Type with Vacuum Connection Features Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve BF Series 3-way ball valves (gearbox linkage):PTFE seat and FKM O-ringMax working pressure: 1500 psig @ 70℉ (103 bar @ 20℃) Temperature […]
NVFCL are proud to announce that we have won The Global Prestige Award – Valve Supplier of the Year. For the last 18 years, Corporate Live Wire have been running both national and international awards. In 2019, they introduced global awards to recognise businesses which are hard-working and successfully. We would have not been in […]
FITOK 6D Series Tube Fittings have been successfully used in the hydrogen powered train. This hydrogen powered train is the world’s first passenger train powered by a hydrogen fuel cell and is now in service in Europe. Hydrogen is regarded as an ideal alternative to diesel power and hydrogen powered trains are in line with […]
NVFCL are proud to announce that we will be sponsoring this years UK HFCA Annual Conference at the QEII Centre. We look forward to seeing as many as you who can attend the event this coming May. The UK HFCA annual conference 2023 will bring together the entire hydrogen value chain to focus on the UK hydrogen […]
If you’re unaware of what the ISO9001 certificate means, organizations use the standard to demonstrate the ability to consistently provide products and services that meet customer and regulatory requirements. NVFCL has just passed BN EN ISO 9001:2015, this is further evidence of NVFCL’s commitment to our customers and represents how we strive to deliver quality […]
Proper selection, handling, and installation of tubing, when combined with proper selection of FITOK tube fittings, are essential for reliable tubing systems. The following variables should be considered when ordering tubing for use with FITOK tube fittings: Surface Finish Surface Finish is very important for proper sealing. Tubing with any kind of depression, scratch, raised […]
It’s the last day of the UK’s first Hydrogen Week. It’s been an excellent opportunity to share news and insights on hydrogen, creating awareness and industry progress. Please find below a brief overview of hydrogen technology, supply, applications and safety measures to provide you with a simple understanding of its value in the global mission to […]
It’s Here, It’s #H2Week We’re attending the one day “Delivering the Hydrogen Economy” conference tomorrow at The Spine in Liverpool as part of Hydrogen Week UK. Here are some words are Director Patrick Drury had to say about being the official sponsor for the UK’s first dedicated Hydrogen Week: “NVFCL are excited to be the official sponsor for the […]
Electropolishing is a process in which mental undergoes a special anodic treatment in an electrolytic solution to obtain a smooth and bright surface. Stainless steel electropolished tubing (EP tubing) is a product processed from bright annealed tubing (BA tubing) by electropolishing the internal surface. FITOK has been adopting strict specifications for raw materials, electropolishing process, […]
The National Conference Centre (Coventry Rd, Solihull, West Midlands, B92 0EJ) March 7th 2023 The Hydrogen and Fuel Cell conference is the largest and longest running hydrogen gathering in the UK. Entering its 19th year, the conference this year is being delivered in partnership with Hydrogen UK, the UK’s leading hydrogen industry association. The conference will […]
Hosted By Northwest Hydrogen Alliance The Spine – Liverpool Feb 14th 2023 As part of the UK’s first Hydrogen Week, the North West Hydrogen Alliance will bring together local, regional and national stakeholders to discuss the significant progress the North West has made in hydrogen delivery. This major one day conference is free to attend […]
Liverpool – Titanic Hotel Rum Warehouse Feb 8 + 9 2023 Foresight Hydrogen Live 2023 is an international conference, exhibition and networking event bringing the hydrogen ecosystem from around the world. Liverpool, located in the Northwest of England, plays host to the country’s leading Hydrogen cluster and therefore plays a fitting location for the global […]
FITOK Gas Stick Assemblies FITOK gas stick assemblies integrate a diaphragm valve/ball valve, a pressure regulator and a pressure gauge into one stick to reduce site connections and achieve precise pressure control and fluid shutoff. FITOK gas stick assemblies, including AGH series and AGL series, are both widely used in the semiconductor industry and so […]
Job title: Compliance Officer Main purpose of job: Manage document and working compliance for all areas of the business. This will involve supporting ISO9001 certification, Fit 4 Nuclear certification, quality management systems, health and safety systems and anything else that could impact customer compliance in any part of the business Position reports to: General Manager […]
What are Pressure Regulators? In industrial fluid systems, maintaining stable pressure control is critical to safe system operation. Pressure regulators reduce high inlet pressure and stabilise it at a lower level as demand, and respond to outlet pressure changes to maintain or control the desired system pressure. Basic Components Loading Mechanism The loading mechanism functions […]
BLC1 – Purge Type Features Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve Piston Valve:PTFE seatMax working pressure: 1500 psig @ 70℉ (103 bar @ 20℃)Temperature range: 0℉ to 450℉ (-18℃ to 232℃) Nitrogen Branch Nitrogen regulator CV […]
MH, MM Series Features Testing Every FITOK metal flexible hose assembly is factory tested with helium to a maximum leak rate of 1 x 10¯⁵ std cm³/s. Cleaning and Packaging FITOK metal flexible hose components are cleaned in accordance with FITOK Standard Cleaning and Packaging Process (FC-01) for general industrial procedures. Shorter hoses are packed […]
Pressure regulators play an important role in fluid systems for a variety of applications by reducing inlet pressure to a lower outlet pressure and keeping outlet pressure stable when inlet pressure fluctuates. Various factors need to be considered when selecting a pressure regulator, the most important of which include: flow, pressure, media and sensing mechanism. […]
QF Series Features Insertion Depth – In order to measure overall length in the coupled position, insertion depth should be deducted from any overall stem and body combination length. Pressure-Temperature Ratings Stem & Body Protector Stem and body protector can prevent the stem and the body from being damaged an Stem Protector Body Protector If […]
Pneumatic Actuated Ball Valves Features 1. Air Source 4. Lubrication 2. Air Supply Pressure 5. Installation 3. Working Temperature Single Acting Actuator Air to port 2 forces the piston to move toward the end cap, causing the springs to compress. The pinion turns counterclockwise while air is being exhausted from port 4. Following loss of […]
FITOK Fire Safe Ball Valves In oil and gas, chemical, metallurgical and pharmaceutical industries, fluids in pipelines are usually flammable, explosive or toxic. As fluid leakage or explosion could lead to a catastrophic accident causing major loss of life and property, fluid system safety is of great concern for all end users. In addition to […]
BLB3 – In-line and Continuous Needle Purge Type Features Sampling from low pressure devices or process lines: 0-145 psig (0-10 bar) In-line sampling Sampling for viscous liquids Needle purge Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve In-line […]
Injection Double Block & Bleed Valves Function – Injection Injection of chemicals and other media into the process stream can be accomplished with this design. A check valve is installed to prevent process fluid from reaching the inlet injection position. There is o.125″ (3 mm) hole in the injection nozzle orifice. The length of the […]
BLA2 – System Purge Type Features Sampling from low pressure devices or process lines:0-145 psig (0-10 bar) System purge Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve BF Series 3-way ball valves:PTFE seat and FKM O-ringMax working pressure: […]
Features Suitable for application with water, oil or gas Chambers are made from seamless pipe and weld caps Full-penetration gas tungsten arc-weld construction to ensure great strength and leak-tight performance Five pressure ratings available Technical Data Working pressure up to: Class 2500 as per ASME B16.34 Socket weld connection as per ASME B16.11 Butt welding […]
Features Suitable for application with water, oil and gas Chambers are made from seamless pipe and weld flat covers Full-penetration gas tungsten arc-weld construction to ensure great strength and leak-tight performance Five pressure ratings available Technical Data Working pressure up to: Class 2500 as per ASME B16.34 Socket weld connection as per ASME B16.11 Butt […]
PTFE-Lined, PS Series Features Lightweight construction for easy handling and installation Core tube material: smooth virgin PTFE Over braid material: 304 stainless steel Working pressure up to: 3000 psig (207 bar) Nominal hose size: 1/4″ to 1″ Working temperature: -65℉ to 400℉ (-53℃ to 204℃) Standard and custom length available Pressure VS Temperature Testing Every […]
A pressure reducing regulator is positioned where the high pressure of a medium needs to be reduced and maintained to a lower and stable level. By turning the adjustment handle, the tension of range spring would be changed so as to control the outlet pressure of the regulator. Features Convoluted diaphragm to provide accurate pressure […]
FITOK Economic Diaphragm Valves DE Series Economic Diaphragm Valves are typical products for ultra high purity gas fluid systems. Reliability and economy are achieved by reducing the number of components, optimising machining methods and mass production, while maintaining the same basic performance by using the same materials, cleaning and packaging processes as the other series […]
Feature NPS:1/8~2 Medium working pressure up to 10000 psig (690 bar) Medium temperature range: -65℉ to 450℉ (-54℃ to 232℃) Quick on-off operation Power source: 24V DC Top indicator shows value status Conform to industry interface standards: ISO 5211 Available factory assembled or in kits for field assembly Output a group of passive contact signals […]
As a mark of respect for the funeral of Her Majesty Queen Elizabeth II, Northern Valve & Fitting Co Ltd will be shutting down the office for the day on 19th September 2022. Our office will return to business at 8:30 am on Tuesday 20th September 2022.
Functions Flushing rings are required for flange-mounted and sandwich type remote if the danger exists that the process conditions and the geometry of the connection could make the medium into deposits or blockages. The flushing ring is clamped between the process flange and the remote seal. Deposits can be flushed away from the diaphragm through […]
Vented Cap Body Grease Fittings Our standard body grease fitting features the Positive Flow Ball Support. This design directs the flow of the lubricant and/or sealant through the centre of the spring without passing through the spring coil, reducing the tendency to “pack-off.” The Positive Flow Ball Support is available in many other fitting styles. […]
Features Stainless steel construction, fluorocarbon FKM O-ring Available in tube sizes from 1/16″ to 11/2″ Working temperature:-25°F to 400°F (-31°C to 204°C) Knurled nut for easy, finger-tight assembly Reliable, repeatable sealing performance Testing The VL vacuum fitting design has been helium leak tested to a maximum leak rate of 4×10- ⁹ std cm³/s at ambient […]
Chemical pumps are commonly used in the industries like oil and gas, chemical, pulp & paper, etc. The function is to inject a certain amount of chemicals into the system to improve production or prevent corrosion. Usually, anti-siphon valve, back pressure valve and check valve are installed downstream to ensure the chemical pump works properly. […]
FT, FB, FI and FW Series Filtration Definitions Sintered Element: Metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact points. Strainer Element: The strainer is cup-shaped and includes an inner cup-shaped support structure having staggered perforations extending through the surfaces thereof, an outer […]
Bellows-sealed Metering Valves Features Reset spring design with no backlash for precise, repeatable flow settings Micrometre handle measures stem position in 0.0008 in. (0.02 mm) increments Valves open to maximum flow in six turns Metering and regulating stem tips available Modular design to reduce maintenance cost Slotted handle tops enable adjustment with a screwdriver Lock […]
FITOK High Purity Ball Valves FITOK BGP series 3-piece high purity ball valves and BRP series hex bar high purity ball valves are designed to meet the requirements of degreasing, low working pressure, high flow rate and bi-directional flow for the clean dry air (CDA) and bulk gas distribution line, which are widely used in […]
Working Pressure up to: Stainless steel: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar) 2DH, 2RH, 3DH, 3RH, 5DH, 5RH up to 10000 psig (690 bar) Alloy C-276: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar) Working Temperature: PTFE Packing: -65℉ to 450℉ (-54℃to 232℃) Graphite Packing: […]
CSF2 – Expansion Chamber Purge Type Features Sampling from devices or process lines System purge and expansion chamber purge Predefined sampling volume controlled by an expansion chamber to ensure safe sampling Easy operation with a single handle Basic Configuration Typical Installation Mode Operation For more information into FITOK sampling systems please contact our sales team: […]
Valve Fittings are widely used in the oil and gas industry. Install grease fittings on the seats and stems of process valves to inject lubricant ensuring proper operation, or inject sealant to temporarily retard leakage and buy valuable time for subsequent treatment, in case of media leakage due to the valve seal is accidently broken. […]
EV Series If downstream line ruptures, the excess flow valve can stop uncontrolled release of system media. When the system is functioning normally, the working element remains in the open position. If the excess flow occurs downstream, the working element quickly moves to the tripped position to stop bleeding. When system pressure reaches balance through […]
CSR Series In atomic layer deposition (ALD) process, selecting the right precursor is critical for process control and film performance, etc. Meanwhile, based on the precursor properties such as volatility and reactivity, matching the right canister will have a synergistic effect on the process. Through high quality control of the material selection to the moulding […]
With increasing number of applications require high temperature precursors, a valve that meets the needs of high temperature applications is critical for industrial pipelines with strict temperature control requirements. FITOK DK series high temperature diaphragm valves are applicable to completely enclosed high temperature, high purity and ultra high purity (UHP) environments where all components of […]
Why do metal gasket face seal fittings meet the needs of the semiconductor industry? The semiconductor industry continues to pursue smaller and lower-power consumption chips, so the process nodes are getting smaller, which places higher demands on process cleanliness. Substandard cleanliness may lead to product quality defects, or even spread contamination of the entire product […]
FDR-1L Series Automatic Changeover System Without Line Pressure Regulator Features With 2 regulators similar to FCR-1 Series Regulators Anodised Aluminium box with clearly marked panel With vent valves to relieve residual pressure quickly, easy and safe to remove and replace gas source Automatic switching of gas source to ensure continuous gas supply Four fixed outlet […]
NVFCL are proud to announce that we have won The Manchester & North West Prestige Award – Valve Supplier of the Year for the second year in a row. For the last 17 years, Corporate Live Wire have been running both national and international awards. In 2019, they introduced regional awards to recognise businesses which […]
GV Series: Working Pressure: Stainless Steel up to 6000 psig (414 bar) Working Temperature: PTFE Packing = : -65℉ to 450℉ (-54℃ to 232℃), Graphite Packing = -65℉ to 1200℉ (-54℃ to 649℃) GR Series: Working Pressure: Stainless Steel up to 6000 psig (414 bar) Working Temperature: Acetal Seat = -20℉ to 250℉ (-28℃ to […]
GP Series Ultra High Purity (UHP) Pressure Gauges, assembled with FITOK FR face seal fittings, are applicable for gases, liquids and corrosive media in high purity conditions and also in corrosive environments. They are the ideal choice for ultra high purity gas distribution systems of industries including semiconductor, electronic, medical, etc. Features Dial Sizes: 2 […]
Features Low actuation pressure Opens and closes quickly and reliably Rotatable port for normally closed actuators allows easy installation Normally open actuators black capped for identification Actuation Modes Normally closed-air opens, spring closes Normally open-air closes, spring opens Technical Data Actuator Type Actuator Pressure Rating psig (bar) Valve and Actuator Working Temperature ℉(℃) Valve Working […]
Fusible plugs are pressure relief devices consisting of the body and the eutectic alloy. The eutectic alloy has a specific melting point. When the plug is exposed to temperature at or above this melting point, the eutectic alloy will melt and the pressure inside the plug will be released to the atmosphere for protection of […]
HQP Series Working pressure: 10,000 psig (690 bar) Push-and-pull type quick coupling without check valve Stem and body material: high tensile 316 Stainless Steel Fluorocarbon FKM O-ring as standard, other O-ring materials available Flow coefficient (Cv) up to 8.2 Sturdy locking mechanism with large contact area to ensure reliable stem retainment Easy and quick connection […]
FITOK Specialised Products Contribute to Safe and Sound Hydrogen Applications To alleviate the global warming caused by accumulated greenhouse gas emissions, major economies in the world are committed to achieving the goals of “peak carbon emissions” and “carbon neutrality”. Hydrogen, as one of the clean energy sources to replace traditional fossil energy, whose applications are […]
NG Series: working pressure up to 3000 psig NGH Series: working pressure up to 5000 psig Features One-piece forged body Easy external adjustments by packing nut Live-loaded packing system Handles of different colours available Compact design Panel mounting available Every valve leak tested with nitrogen or compressed air at the maximum allowable working pressure Working […]
Two kinds of optional sampling containers: Bottles and Cylinders System main body materials: 316 SS, 316L SS, 304L SS, ect Connection: 1/4″ Tube fitting, 1/2″ NPT Thread or NPS 1/2″ Flange Working temperature and pressure range Applicable process conditions: High-temperature, high-pressure, high-viscosity, corrosive, high-toxicity or environmentally hazardous liquids Various mounting types BL – Bottle Configuration […]
TFO Series L-ring Face Seal Fittings Features Reduced internal entrapment Lubricant-free L-ring seal Controlled L-ring extrusion to prevent over-tightening Butt weld connection to ensure the system unhindered Standard surface roughness finished to an average of Ra 20 μin. (0.51 μm) Each fitting marked with size, material and heat number Technical Data Sizes range from 1/4″ […]
Hydraulic Ball Valves Features Working pressure up to 20,000 psig (1379 bar) Maximum external pressure: 6,000 psig (414 bar) Hydraulic supply pressure: 3,000 psig (207 bar) Working temperature: 0°F to 200°F (-17.8℃ to 93℃) High tensile 316 stainless steel or S17400 stainless steel for valve body and S17400 for hydraulic actuator Fluorocarbon FKM O-ring and […]
FR Series Face Seal Fittings Features Metal-to-metal seal to provide perfect leak-tight service for working conditions from critical vacuum to high pressure Precision manufactured gasket to ensure best performance Test port at nut for easy leak testing Silver-plated female threads Standard surface roughness finished to an average of Ra 10 μin. (0.25μm) or electropolished to […]
BLC3 – Fixed Volume Type with Heating/Cooling Jacket Features Sampling from vacuum, low or high pressure devices or process lines Fixed volume sampling Sampling with a piston valve to ensure zero dead volume Sampling for highly viscous liquids Heating/cooling jacket to ensure sampling within a certain range of temperature Needle purge Basic Configuration Typical Installation […]
RB Series Bleed valves can be used on instrument devices such as multi-valve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration. Features Compact design for easy installation Hardened stem and tip to extend cycle life Working pressure up to: 10000 psig (690 […]
Features Max working pressure: 3000 psig (207 bar) Working temperature: -10 F to 400 F (-23 C to 204 C) Sizes from 1/8″ to 3/4″ and 6 mm to 12 mm Easily maintained and cleaned Low operating torque Replaceable plug assembly Handle as indicator of flow direction Options for handle colour Positive handle shutoff Every […]
RP Series Purge valves are manual bleed, vent or drain valves. The knurled cap is permanently assembled to the valve body for safety. One-quarter turn with a wrench from finger-tight obtains leak-tight closure during initial installation. Tightening with a wrench ensures closure to the rated pressure with subsequent installations. Features Compact design for easy installation […]
Features Sizes range from 1/16″ to 2″ and 2 mm to 50 mm Diverse materials and configurations are available Precision machined components ensure perfect deformation of the ferrules and tubing Hardened threads with smooth surface finish avoid galling and help to extend the fitting service life Female nut threads are silver-plated to reduce the friction […]
RV, RL and RM Series FITOK relief valves open when systems pressure reaches the set pressure and close when system pressure falls below the set pressure. Features Working Temperature: -40°F to 300°F (-40°C to 148°C) Variety of end connections Liquid or gas service Adjustable bonnet cap and adjustable set pressure Lead seal lock wire through […]
CHEMUK 2022 will return on the 11th & 12th May running in Hall 1 at the NEC, Birmingham. The expo will present 350+ specialist exhibitors and 100+ expert speakers split between two major shows: The Chemical Industries Supply Chain Show The Chemical, Process & Plant Engineering Show CHEMUK 2022 sees an expansion of the exhibits space and speaker programme coverage, relating to the UK’s Chemical […]
All-Energy takes pride in being the UK’s largest low carbon energy and full supply chain renewables event; while the co-located Dcarbonise is aimed at private and public sector energy end users. The next live edition of All-Energy & Dcarbonise is taking place in May 2022 where we will be heading back to the SEC, Glasgow, for our […]
Fluid Power & Systems 2022 is the only event in the UK that is 100% focused on a comprehensive range of hydraulic and pneumatic equipment, together with products that facilitate better electro-mechanic system design and application for improved process automation, control, monitoring and analytics. Fully supported by the British Fluid Power Association (BFPA), British Valve […]
CV, CH, CO, CA, COA, CL and CW Series Features CV Series Resilient O-ring seat design for leak free sealing Working pressure up to: 300 psig (207 bar) Working temperature: -10°F to 375°F (-23°C to 190°C) Cracking pressure: 1/3 to 25 psig (0.02 to 1.7 bar) Variety of end connections and materials available Fixed cracking […]
Features Working pressure up to 20,000 psig (1379 bar) Easy and quick connection to T15 and T20D series tubing, tubing sizes available in 1/8″, 1/4″, 3/8″, 1/2″, 9/16″, 3/4″, and 1″ High tensile 316 stainless steel material Nut threads coated with molybdenum disulfide based lubricant to minimise the friction Long-tube support area to improve vibration […]
For tapered pipe fittings PTFE tape or thread sealant should be applied for sealing. Installation steps are as follows. Step 1: Clean both male and female thread. Remove all the dirt or residual tape. Step 2: Wrap the thread PTFE tape starting from the first full thread in the direction of thread. 2-4 revolutions of […]
Tubing Variables Wall Thickness Outside and Inside Diameter Type of Material Seamless or Welded Hardness Concentricity and Ovality Surface Finish Wall Thickness The wall thickness is directly related to the pressure rating of the system. If the wall thickness is too thick, it will not allow the ferrules to deform the tube. If the wall […]
Construction Special Handle Design: Large area for torque transmission Spring washer against loosening, screw does not bear the load Firm and reliable handle Special Design for Upper and Lower Stem: Helical movement of upper stem Linear motion of lower stem Low friction to ensure long service life Construction for High Temperature Max Working Temp: 649℃ […]
Differences Weight Product Variants Surface Condition Application Fewer Connections and Less Pressure Drop Weight Tubing – Full wall Thickness of tubing is used to contain pressure. Pipe – Wall thickness of pipe needed to contain pressure. Extra pipe wall thickness required for threading. Wall thickness of pipe that must be used. Product Variants Tubes can […]
HQP Series – Features MAWP: 10,000 psig (690 bar) Body material: high tensile 316 SS a variety of O-ring materials optional Push-and-pull type quick coupling without check valve Flow coefficient up to 8.2 Locking mechanism with large contact area for for safer and more reliable connections of coupler and nipple. HQP Series Construction Locking mechanism […]
FITOK SSM Series Stream Switching System is a modular assembly designed for process analyser systems. The system utilises surface mount technology and modular design to integrate multiple streams into a compact assembly. It boasts the advantage of compact design, easy maintenance and high reliability. Features Modular design for easy installation and maintenance Compact design for […]
NVFCL invite you to read the first copy of our newsletter Drip Feed. We plan to release a couple of issues every year to keep you updated of any new FITOK product news and any general information we would like to share about NVFCL. We hope you find it informative and useful. https://www.nvfcl.com/dripfeed/mobile/index.html
Features Radius junction design with elbows to provide smooth flow path Precision machined diameter to match tube diameter Square, burr-free tube weld ends to enhance alignment Manual or automatic welding equipment both applicable Tube wall uniformity to promote weld repeatability Standard surface roughness finished to an average of Ra 10 μin. (0.25 μm) o a […]
Introduction FITOK HPH series medium & high pressure hoses are made of multi-layer steel wire and polymer reinforcement and are applicable in most of the high pressure working conditions. Features Core tube materials: Polyoxymethylene or nylon Reinforcement: Multi-layers of steel wire Cover materials: Nylon or polyurethane, different colour for different working pressure Working pressure up […]
This week the NDA have announced a new date for its 2022 group Supply Chain Event. NVFCL will be attending the NDA’s ninth supply chain event which will now be held on 21st July 2022. The event was due to take place on 3rd Feb 2022 at The International Centre, Telford, but was postponed due […]
Please see one of our directors Darrell Jones speaking at Midlands Energy & Transport Innovation.
Principle and Application of Pressure Regulators The pressure regulators adopt a special flow path structure. When the high pressure medium flows through the orifice from the inlet, the flow rate of the medium increases and the pressure decreases, thus achieving the purpose of pressure regulation. In addition, the pressure regulators can balance the medium load […]
If you are currently struggling to satisfy your twin ferrule or valve and fitting requirements from your usual suppliers, PLEASE give NVFCL a call. We are hearing from various sources that some our competitors have closed their order books due to a back log of orders as a result of long delivery lead times and problems with their supply chain. Contact our sales team at sales@nvfcl.com or 01942601209
FITOK Capillary Tubing, is a kind of miniature stainless steel tubing, available in a wide range of stainless steels. Sizes range from 1/16’’ to 1/4’’ O.D. In varying lengths, wall thickness and grades. It is widely used in instrumentation Industries. Features Fully annealed stainless steel capillary tube provides excellent flexibility with the minimum bending radius […]
ISPE UK Emerging Leaders are excited to launch the UK Emerging Leaders Awards 2021 for students, apprentices, recent graduates and young professionals in UK pharmaceutical engineering and manufacturing. We are now accepting submissions.
Overview High purity diaphragm valves are mainly used in semiconductor, natural gas, photovoltaic solar, microelectronics, liquid crystal panel, chemical, pharmaceutical and other industries. They are applicable to conditions with ultra high purity gases, corrosive gases, toxic gases, flammable and explosive fluids. FITOK has successively developed a variety of ultra high purity diaphragm valves based on […]
FITOK products for hydrogen systems are designed to deliver the high level of safety, reliability, and high performance for on-vehicle and infrastructure applications. To ensure the high level of quality and safety for hydrogen systems, FITOK has applied a higher standard in designing, manufacturing and testing. The higher standard covers the raw material specification, brands […]
Overview Atomic Layer Deposition (ALD) is a method of applying thin films to various substrates with atomic scale precision. As chip node dimensions are continuously shrinking, traditional deposition techniques have reached their limits. Depositing ultra-thin layer at the nanoscale requires Atomic Layer Deposition (ALD) technology, which allows materials to be deposited one atomic layer at […]
Overview Instrument air in power plants and instrument gas sources in petrochemical plants are typically medium and low pressure gas pipelines. Normally, the media in this medium and low pressure gas pipeline is compressed air or nitrogen with pressure≤10MPa at room temperature. Typical applications of source ball valves in methane cryogenic separation devices, sulfur recovery […]
What are the advantages of enhanced-316/316L tubing Except for ordinary type 316/316L steel, FITOK tubing can also be supplied in enhanced-316/316L. Ni, Cr and Mo contents of the material are in close approximation to upper values defined in ASTM requirements, among which, molybdenum content exceeds 2.6%. With increased molybdenum content, enhanced-316/316L tubing shows improved pitting […]
Overview Sample cylinders can be used for many applications across several industries. With a variety of configurations and requirements for sampling, FITOK has developed an offering to cover every need. In addition to manufacturing each component, FITOK also offers full assembly, testing, and certification on standard, TPED, and DOT rated cylinders. Technical Data Assembly Working […]
Integrated Gas System is a modular system used for gas control in semiconductor industry. With the advance of semiconductor process technology, higher requirements for gas control system arise. FITOK integrated gas system adopts surface mount components conforming to SEMI standard for modular design, which makes installation and maintenance simpler while reducing the size of the […]