BLB3 – In-line and Continuous Needle Purge Type Features Sampling from low pressure devices or process lines: 0-145 psig (0-10 bar) In-line sampling Sampling for viscous liquids Needle purge Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve In-line […]
Injection Double Block & Bleed Valves Function – Injection Injection of chemicals and other media into the process stream can be accomplished with this design. A check valve is installed to prevent process fluid from reaching the inlet injection position. There is o.125″ (3 mm) hole in the injection nozzle orifice. The length of the […]
BLA2 – System Purge Type Features Sampling from low pressure devices or process lines:0-145 psig (0-10 bar) System purge Basic Configuration Wetted Material 316 SS Sleeve Assembly 250 ml sleeve with bottle retaining clip Needle Assembly Process/vent needle ID: 1.4 mm (0.06″) Sampling Valve BF Series 3-way ball valves:PTFE seat and FKM O-ringMax working pressure: […]
Features Suitable for application with water, oil or gas Chambers are made from seamless pipe and weld caps Full-penetration gas tungsten arc-weld construction to ensure great strength and leak-tight performance Five pressure ratings available Technical Data Working pressure up to: Class 2500 as per ASME B16.34 Socket weld connection as per ASME B16.11 Butt welding […]
Features Suitable for application with water, oil and gas Chambers are made from seamless pipe and weld flat covers Full-penetration gas tungsten arc-weld construction to ensure great strength and leak-tight performance Five pressure ratings available Technical Data Working pressure up to: Class 2500 as per ASME B16.34 Socket weld connection as per ASME B16.11 Butt […]