Features Stainless steel construction, fluorocarbon FKM O-ring Available in tube sizes from 1/16″ to 11/2″ Working temperature:-25°F to 400°F (-31°C to 204°C) Knurled nut for easy, finger-tight assembly Reliable, repeatable sealing performance Testing The VL vacuum fitting design has been helium leak tested to a maximum leak rate of 4×10- ⁹ std cm³/s at ambient […]
Chemical pumps are commonly used in the industries like oil and gas, chemical, pulp & paper, etc. The function is to inject a certain amount of chemicals into the system to improve production or prevent corrosion. Usually, anti-siphon valve, back pressure valve and check valve are installed downstream to ensure the chemical pump works properly. […]
FT, FB, FI and FW Series Filtration Definitions Sintered Element: Metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact points. Strainer Element: The strainer is cup-shaped and includes an inner cup-shaped support structure having staggered perforations extending through the surfaces thereof, an outer […]
Bellows-sealed Metering Valves Features Reset spring design with no backlash for precise, repeatable flow settings Micrometre handle measures stem position in 0.0008 in. (0.02 mm) increments Valves open to maximum flow in six turns Metering and regulating stem tips available Modular design to reduce maintenance cost Slotted handle tops enable adjustment with a screwdriver Lock […]
FITOK High Purity Ball Valves FITOK BGP series 3-piece high purity ball valves and BRP series hex bar high purity ball valves are designed to meet the requirements of degreasing, low working pressure, high flow rate and bi-directional flow for the clean dry air (CDA) and bulk gas distribution line, which are widely used in […]
Working Pressure up to: Stainless steel: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar) 2DH, 2RH, 3DH, 3RH, 5DH, 5RH up to 10000 psig (690 bar) Alloy C-276: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar) Working Temperature: PTFE Packing: -65℉ to 450℉ (-54℃to 232℃) Graphite Packing: […]
CSF2 – Expansion Chamber Purge Type Features Sampling from devices or process lines System purge and expansion chamber purge Predefined sampling volume controlled by an expansion chamber to ensure safe sampling Easy operation with a single handle Basic Configuration Typical Installation Mode Operation For more information into FITOK sampling systems please contact our sales team: […]
Valve Fittings are widely used in the oil and gas industry. Install grease fittings on the seats and stems of process valves to inject lubricant ensuring proper operation, or inject sealant to temporarily retard leakage and buy valuable time for subsequent treatment, in case of media leakage due to the valve seal is accidently broken. […]