Month: April 2022

TFO Series

TFO Series L-ring Face Seal Fittings Features Reduced internal entrapment Lubricant-free L-ring seal Controlled L-ring extrusion to prevent over-tightening Butt weld connection to ensure the system unhindered Standard surface roughness finished to an average of Ra 20 μin. (0.51 μm) Each fitting marked with size, material and heat number Technical Data Sizes range from 1/4″ […]

Read more
Subsea

Hydraulic Ball Valves Features Working pressure up to 20,000 psig (1379 bar) Maximum external pressure: 6,000 psig (414 bar) Hydraulic supply pressure: 3,000 psig (207 bar) Working temperature: 0°F to 200°F (-17.8℃ to 93℃) High tensile 316 stainless steel or S17400 stainless steel for valve body and S17400 for hydraulic actuator Fluorocarbon FKM O-ring and […]

Read more
Face Seal

FR Series Face Seal Fittings Features Metal-to-metal seal to provide perfect leak-tight service for working conditions from critical vacuum to high pressure Precision manufactured gasket to ensure best performance Test port at nut for easy leak testing Silver-plated female threads Standard surface roughness finished to an average of Ra 10 μin. (0.25μm) or electropolished to […]

Read more
Sampling Systems – BLC3

BLC3 – Fixed Volume Type with Heating/Cooling Jacket Features Sampling from vacuum, low or high pressure devices or process lines Fixed volume sampling Sampling with a piston valve to ensure zero dead volume Sampling for highly viscous liquids Heating/cooling jacket to ensure sampling within a certain range of temperature Needle purge Basic Configuration Typical Installation […]

Read more
Bleed Valves

RB Series Bleed valves can be used on instrument devices such as multi-valve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration. Features Compact design for easy installation Hardened stem and tip to extend cycle life Working pressure up to: 10000 psig (690 […]

Read more
Plug Valves

Features Max working pressure: 3000 psig (207 bar) Working temperature: -10 F to 400 F (-23 C to 204 C) Sizes from 1/8″ to 3/4″ and 6 mm to 12 mm Easily maintained and cleaned Low operating torque Replaceable plug assembly Handle as indicator of flow direction Options for handle colour Positive handle shutoff Every […]

Read more