RP Series Purge valves are manual bleed, vent or drain valves. The knurled cap is permanently assembled to the valve body for safety. One-quarter turn with a wrench from finger-tight obtains leak-tight closure during initial installation. Tightening with a wrench ensures closure to the rated pressure with subsequent installations. Features Compact design for easy installation […]
Features Sizes range from 1/16″ to 2″ and 2 mm to 50 mm Diverse materials and configurations are available Precision machined components ensure perfect deformation of the ferrules and tubing Hardened threads with smooth surface finish avoid galling and help to extend the fitting service life Female nut threads are silver-plated to reduce the friction […]
RV, RL and RM Series FITOK relief valves open when systems pressure reaches the set pressure and close when system pressure falls below the set pressure. Features Working Temperature: -40°F to 300°F (-40°C to 148°C) Variety of end connections Liquid or gas service Adjustable bonnet cap and adjustable set pressure Lead seal lock wire through […]
CHEMUK 2022 will return on the 11th & 12th May running in Hall 1 at the NEC, Birmingham. The expo will present 350+ specialist exhibitors and 100+ expert speakers split between two major shows: The Chemical Industries Supply Chain Show The Chemical, Process & Plant Engineering Show CHEMUK 2022 sees an expansion of the exhibits space and speaker programme coverage, relating to the UK’s Chemical […]
All-Energy takes pride in being the UK’s largest low carbon energy and full supply chain renewables event; while the co-located Dcarbonise is aimed at private and public sector energy end users. The next live edition of All-Energy & Dcarbonise is taking place in May 2022 where we will be heading back to the SEC, Glasgow, for our […]
Fluid Power & Systems 2022 is the only event in the UK that is 100% focused on a comprehensive range of hydraulic and pneumatic equipment, together with products that facilitate better electro-mechanic system design and application for improved process automation, control, monitoring and analytics. Fully supported by the British Fluid Power Association (BFPA), British Valve […]
CV, CH, CO, CA, COA, CL and CW Series Features CV Series Resilient O-ring seat design for leak free sealing Working pressure up to: 300 psig (207 bar) Working temperature: -10°F to 375°F (-23°C to 190°C) Cracking pressure: 1/3 to 25 psig (0.02 to 1.7 bar) Variety of end connections and materials available Fixed cracking […]
Features Working pressure up to 20,000 psig (1379 bar) Easy and quick connection to T15 and T20D series tubing, tubing sizes available in 1/8″, 1/4″, 3/8″, 1/2″, 9/16″, 3/4″, and 1″ High tensile 316 stainless steel material Nut threads coated with molybdenum disulfide based lubricant to minimise the friction Long-tube support area to improve vibration […]
For tapered pipe fittings PTFE tape or thread sealant should be applied for sealing. Installation steps are as follows. Step 1: Clean both male and female thread. Remove all the dirt or residual tape. Step 2: Wrap the thread PTFE tape starting from the first full thread in the direction of thread. 2-4 revolutions of […]
Tubing Variables Wall Thickness Outside and Inside Diameter Type of Material Seamless or Welded Hardness Concentricity and Ovality Surface Finish Wall Thickness The wall thickness is directly related to the pressure rating of the system. If the wall thickness is too thick, it will not allow the ferrules to deform the tube. If the wall […]
Construction Special Handle Design: Large area for torque transmission Spring washer against loosening, screw does not bear the load Firm and reliable handle Special Design for Upper and Lower Stem: Helical movement of upper stem Linear motion of lower stem Low friction to ensure long service life Construction for High Temperature Max Working Temp: 649℃ […]